ps绘制一个老式宝丽莱相机
在本教程中，我们将创建一个宝丽来相机图标。我们将使用大量的图层样式和笔刷工具绘制手动实现逼真的外观。让我们开始吧!
先看看效果图
http://pic.16xx8.com/allimg/110616/122HV451-0.jpg
Step 1:Upper Body
Createnew file, with size 600×700 px. Start by creating a rounded rectangle withcolor: #dbd3co.
创建新的文件，大小为600× 700像素。首先，创建一个圆角矩形的颜色：#dbd3co。
http://pic.16xx8.com/allimg/110616/1220402620-1.jpgStep2
Hit Command/Ctrl + T to perform transformation. Right click and choose Perspective. Pull lower corner outward.
点击命令/按Ctrl + T进行改造。右击并选择视角。下角向外拉。
http://pic.16xx8.com/allimg/110616/1220401343-2.jpghttp://pic.16xx8.com/allimg/110616/12204042C-3.jpghttp://pic.16xx8.com/allimg/110616/1220406338-4.jpgStep 3
Addfollowing layer styles.
新增以下图层样式。
http://pic.16xx8.com/allimg/110616/12204063Y-5.jpghttp://pic.16xx8.com/allimg/110616/12204054D-6.jpghttp://pic.16xx8.com/allimg/110616/1220402519-7.jpghttp://pic.16xx8.com/allimg/110616/1220402423-8.jpgStep 4
Command/Ctrl-clicklayer to get a selection based on its shape. Nudge selection 1 px up bypressing up arrow. Hold Command/Ctrl + Alt then click layer again to subtractthe selection. This process will give you a 1 px selection on top of the shape.
命令/
Ctrl键点击层以获得其形状为基础的选择。微调选择1像素注册按向上箭头。按住Command/按Ctrl + Alt然后再减去按层选择。这个过程会给你一个形状的前1像素的选择。
http://pic.16xx8.com/allimg/110616/122040K28-9.jpgStep 5
Createnew layer and fill selection with white. Reduce layer opacity to 60%. Below,you can see the subtle difference before and after adding a 1 px line.
创建新图层，用白色填充选择。降低图层不透明度为60%。下面，你可以看到之前和之后添加1像素线的细微差别。
http://pic.16xx8.com/allimg/110616/1220401N4-10.jpghttp://pic.16xx8.com/allimg/110616/122040G45-11.jpgStep 6
Repeatprevious step, this time for bottom of the shape. Fill selection with black.
重复上一步，这对于底部时的形状。选择填充黑色。
http://pic.16xx8.com/allimg/110616/12204055Q-12.jpghttp://pic.16xx8.com/allimg/110616/1220401a9-13.jpg
Step 7:Middle Body
Use pentool to create this shape. Use #dbd3co for its color. Add Layer Style InnerGlow and Gradient Overlay.
使用钢笔工具创建此形状。它的颜色使用#dbd3co。添加图层样式内发光和渐变叠加。
http://pic.16xx8.com/allimg/110616/12204015K-14.jpghttp://pic.16xx8.com/allimg/110616/1220403630-15.jpghttp://pic.16xx8.com/allimg/110616/1220402003-16.jpgstep 8
Duplicatethe shape we have just created. Place it behind the original. Use arrow tool tomove the topmost points up. Change shape color to #908a7a.
重复的形状，我们刚刚创建的。原来它放在后面。使用箭头工具移动最上面的点组成。改变形状，颜色为#908a7a。
http://pic.16xx8.com/allimg/110616/1220403S3-17.jpgStep 9
Theshape is still too light. We need to darken it again to add more depth. Createnew layer. Convert layer to Clipping Mask by pressing Command/Ctrl + Alt + G.Paint black on top of the shape.
形状仍然过轻。我们需要再次变暗增加更多的深度。创建新的图层。转换层的迫切剪贴蒙版命令/按Ctrl+ Alt+G。填充顶部形状为黑色。
http://pic.16xx8.com/allimg/110616/1220402F5-18.jpgStep 10
Createnew layer. Activate brush tool, in the Option Bar set brush hardness to 0%.Draw a soft white line.
创建新的图层。激活笔刷工具，设置画笔硬度为0%。画出软白线。
http://pic.16xx8.com/allimg/110616/122040JP-19.jpg
Step 11
Again, paintanother soft white lines on indicated areas.
同样，填充另一个表示地区软白线。
http://pic.16xx8.com/allimg/110616/1220401463-20.jpgStep 12
Createnew layer. Command/Ctrl-click shape. Use soft brush to paint white on eachedge. Reduce layer opacity to 9%.
创建新的图层。命令/
Ctrl键单击形状。用软刷子涂刷在每个边缘白色。图层不透明度降低到9%。
http://pic.16xx8.com/allimg/110616/1220405209-21.jpgStep 13:Camera Face
Draw arounded rectangle for front face of the camera. Use #24201d for its color. AddLayer Style Gradient Overlay.
画出相机的前脸圆角矩形。它的颜色使用#24201d。添加渐变叠加图层样式。
http://pic.16xx8.com/allimg/110616/1220401N6-22.jpghttp://pic.16xx8.com/allimg/110616/1220404513-23.jpgStep 14
Insideprevious shape, draw smaller rounded rectangle with color #131611. Add followingLayer Styles.
在原来的形状内，画一个小圆角矩形颜色#131611。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/122040I00-24.jpghttp://pic.16xx8.com/allimg/110616/1220403606-25.jpghttp://pic.16xx8.com/allimg/110616/1220402C4-26.jpgStep 15
Add asmall rounded rectangle with color #4a4847 and place it in the middle of theprevious shape.
添加一个颜色#4a4847小圆角矩形，并放置在前面的形状中间。
http://pic.16xx8.com/allimg/110616/12204045J-27.jpg
Step 16
Duplicateshape, move it up 1 px. Change its color to #2c2a29.
重复的形状，将其移动了1像素。改变其颜色为#2c2a29。
http://pic.16xx8.com/allimg/110616/1220405Z0-28.jpghttp://pic.16xx8.com/allimg/110616/1220401627-29.jpgStep 17
Createa new layer and convert it to Clipping Mask by pressing Command/Ctrl + Alt + G.Draw shadow on top of the shape.
创建一个新层，并将其转换按命令/按Ctrl + Alt+G。画上阴影的形状到剪贴蒙版。
http://pic.16xx8.com/allimg/110616/1220401Q4-30.jpgStep 18
Duplicatethe shapes by dragging it while holding the Alt key.
按住Alt键重复的拖动形状。
http://pic.16xx8.com/allimg/110616/1220404258-31.jpgStep 19
Draw ablack rounded rectangle. See picture below to see its position.
绘制一个黑色的圆角矩形。见下面的图片看到它的位置。
http://pic.16xx8.com/allimg/110616/1220401524-32.jpgStep 20
HitCommand/Ctrl + T, right click and choose Skew.
点击命令/按Ctrl + T，右击并选择偏差。
http://pic.16xx8.com/allimg/110616/1220401E7-33.jpg
Step 21
Pulllower right corner up. Add Gradient Overlay.
拉右下角了。添加渐变叠加。
http://pic.16xx8.com/allimg/110616/122HV350-1.jpghttp://pic.16xx8.com/allimg/110616/12204041Z-35.jpghttp://pic.16xx8.com/allimg/110616/12204064T-36.jpghttp://pic.16xx8.com/allimg/110616/1220403O2-37.jpgStep 22
Duplicateshape. Move it to the opposite side. Hit Command/Ctrl + T to performtransformation. Right click and choose Flip Horizontal.
重复的形状。将它移动到另一侧。点击命令/按Ctrl+ T进行改造。右键单击并选择水平翻转。
http://pic.16xx8.com/allimg/110616/12204043V-38.jpgStep 23
Draw a roundedcovering both shapes we have just created. Add Layer Styles.
绘制一个圆形覆盖我们刚才创建的形状。添加图层样式。
http://pic.16xx8.com/allimg/110616/1220402057-39.jpghttp://pic.16xx8.com/allimg/110616/1220404558-40.jpghttp://pic.16xx8.com/allimg/110616/1220406202-41.jpghttp://pic.16xx8.com/allimg/110616/1220406164-42.jpg
Step 24
Usetype tool to add camera name. Add a subtle Drop Shadow to give itthree-dimensional appearance.
使用文字工具添加摄像头的名称。添加一个微妙的阴影，给它的三维外观。
http://pic.16xx8.com/allimg/110616/1220404224-43.jpghttp://pic.16xx8.com/allimg/110616/1220405118-44.jpgStep 25
Draw acircle to be used as a camera lens. Add Gradient Overlay.
画一个圆圈，作为镜头使用。添加渐变叠加。
http://pic.16xx8.com/allimg/110616/1220406408-45.jpghttp://pic.16xx8.com/allimg/110616/1220403D3-46.jpgStep26
Selectcircle path. Hit Command/Ctrl + C then Command/Ctrl + V to duplicate it.Perform transformation (Command/Ctrl + T) and make it smaller. See picturebelow to reference.
选择圆路径。点击命令/按Ctrl+
C，然后命令/
Ctrl + V键复制它。执行转换(命令/按Ctrl+ T)，使之更小。见下面的图片参考。
http://pic.16xx8.com/allimg/110616/1220402a2-47.jpgStep 27
Fromthe option bar, set path mode to subtract.
从选项栏，设定的路径模式为subtract。
http://pic.16xx8.com/allimg/110616/1220401215-48.jpg
Step 28
Createnew layer then convert it to Clipping Mask by pressing Command/Ctrl + Alt + G.Draw highlight on top of the lens.
创建新层，然后将其转换为剪贴蒙按命令/按Ctrl+ Alt+G借鉴镜头前的亮点。
Step 29
Createnew layer and put it behind shape we have just created. Create circularselection and fill it with black. Soften it by adding Gaussian Blur (Filter > Blur > Gaussian Blur).
创建新层，并把它的背后，我们刚刚创建的形状。创建圆形选区，并填充黑色。软化，加入高斯模糊(滤镜“模糊”高斯模糊)。
http://pic.16xx8.com/allimg/110616/1220403443-49.jpghttp://pic.16xx8.com/allimg/110616/1220406255-50.jpgStep 30
Draw acircle shape with color #212121. Duplicate shape then move it 5 px up. Set pathmode to Subtract.
绘制一个圆形颜色#212121。重复的形状，然后将其移动5像素了。设置路径模式为减。
http://pic.16xx8.com/allimg/110616/1220405440-51.jpgStep 31
Next,create a ring shape. To create this shape, start with a regular circle shape,duplicate the path and transform it to smaller size. Set path mode to Subtract.Add Bevel and Emboss and Gradient Overlay.
接下来，形成一个环的形状。要创建此形状，开始一个规则的圆形形状，复制路径并将其转换为更小的尺寸。设置路径模式，以减法。添加斜面和浮雕和渐变叠加。
http://pic.16xx8.com/allimg/110616/1220401c5-52.jpghttp://pic.16xx8.com/allimg/110616/122040E09-53.jpghttp://pic.16xx8.com/allimg/110616/122040E61-54.jpgStep 32
We willstart drawing inner part of the lens. First, I want you to know that they arejust simply lots of circle shapes combined with layer style. Draw a circleshape inside the lens.
我们将开始绘制的镜头内部。首先，我想让你知道，他们只是简单的圆形状与图层样式结合地段。镜头内画一个圆圈形状。
http://pic.16xx8.com/allimg/110616/1220403030-55.jpg
Step 33
Again,draw smaller circle shape. Add Bevel and Emboss and Gradient Overlay.
同样，画小圆圈形状。添加斜面和浮雕和渐变叠加。
http://pic.16xx8.com/allimg/110616/12204031W-56.jpghttp://pic.16xx8.com/allimg/110616/1220405243-57.jpghttp://pic.16xx8.com/allimg/110616/1220401645-58.jpgStep 34
Duplicateshape we have just created. Resize it to 98%. Delete all its layer styles andadd Gradient Overlay with this setting.
重复的形状我们刚刚创建的。调整到98%。删除其所有的图层样式并添加此设置渐变叠加。
http://pic.16xx8.com/allimg/110616/1220406444-59.jpghttp://pic.16xx8.com/allimg/110616/1220402920-60.jpgStep 35
Duplicatetwo circle shapes that we have created in Step 32 – Step 34. Resize them to asmaller size.
重复的两个圆圈的形状，我们已经创建在步骤32- 步骤34。调整到一个较小的大小。
http://pic.16xx8.com/allimg/110616/122040B40-61.jpgStep36
Drawa bigger circle shape from the same origin. Place it behind other circleshapes. Set Blend Mode layer to Screen, reduce its Opacity to 2%, and addStroke.
吸取更大的圆形状相同的起源。圆形状落后于其他地方了。设置混合模式为滤色层，减少其不透明度为2%，并添加描边。
http://pic.16xx8.com/allimg/110616/1220405248-62.jpghttp://pic.16xx8.com/allimg/110616/1220405310-63.jpgStep 35
Duplicateand resize shape a few times to create more lines. Remember that the Opacity ofthese shapes is only 2%, very subtle.
复制并形成了几次调整，创造更多的行。请记住，这些形状不透明度只有2%，非常微妙。
http://pic.16xx8.com/allimg/110616/1220403603-64.jpgStep 36
Draw acircle shape with color #515151 covering the lens. Add Gradient Overlay andreduce its Opacity to 38%.
绘制一个圆形颜色#515151涵盖镜头。添加渐变叠加，并减少其不透明度为38%。
http://pic.16xx8.com/allimg/110616/122040K51-65.jpghttp://pic.16xx8.com/allimg/110616/122040D25-66.jpghttp://pic.16xx8.com/allimg/110616/122040G17-67.jpg
Step 37
Let’sadd highlight and shadow to make it more realistic. Create a circular selectioncovering the lens. Create new group then click Add Layer Mask icon.
让我们添加高光和阴影，使之更加切合实际。创建一个圆形选区覆盖的镜头。创建新组，然后单击添加图层蒙板图标。
http://pic.16xx8.com/allimg/110616/1220405443-68.jpgStep 38
Createnew layer and make sure it is inside the group we have just created. Fill layerwith black. Click Filter > Render > Lens Flare. Change blend mode toScreen and reduce Opacity to 15%.
创建新层，并确保它在我们刚才创建的组中。用黑色填充层。点击“滤镜 > 渲染“镜头眩光。改变混合模式为屏幕，不透明度降低到15%。
http://pic.16xx8.com/allimg/110616/1220404037-69.jpghttp://pic.16xx8.com/allimg/110616/12204025S-70.jpgStep 39
Createnew layer and paint highlights on the lens. Reduce layer Opacity to 10%.
创建新层和油漆突出的镜头。降低图层不透明度为10%。
http://pic.16xx8.com/allimg/110616/122040H15-71.jpgStep 40
Usesmaller brush to draw some lines on the lens. Change layer blend mode to Screenand reduce Opacity to 15%.
使用较小的画笔绘制镜头上的一些行。更改图层混合模式为屏幕，不透明度降低到15%
http://pic.16xx8.com/allimg/110616/122040H94-72.jpgStep 41
Drawanother layer and draw a small highlight and shadow.
绘制另一个图层，画一个小亮点和阴影。
http://pic.16xx8.com/allimg/110616/12204044a-73.jpg
Step 42:Viewfinder
Draw arounded rectangle with color #1b1614. Add following Layer Styles.
绘制一个圆角矩形的颜色#1b1614。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/122040H30-74.jpghttp://pic.16xx8.com/allimg/110616/122040NF-75.jpghttp://pic.16xx8.com/allimg/110616/1220404600-76.jpghttp://pic.16xx8.com/allimg/110616/1220401126-77.jpgStep 43
Drawsmaller rounded rectangle. Add following Layer Styles.
绘制小圆角矩形。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/1220406462-78.jpghttp://pic.16xx8.com/allimg/110616/1220401603-79.jpghttp://pic.16xx8.com/allimg/110616/1220405W1-80.jpgStep 44
Duplicatecircle shapes from lens and resize it until it fit inside the viewfinder.Create a new layer on top of the circle and draw some subtle highlights.
从镜头重复的圆圈形状和大小，直到它里面的取景器适合。创建一个圆形的顶新图层，画一些微妙的亮点。
http://pic.16xx8.com/allimg/110616/12204035K-81.jpgStep 45:Button
Draw agreen circle shape. Add following Layer Styles.
画一个绿色的圆形。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/1220405238-82.jpghttp://pic.16xx8.com/allimg/110616/1220403395-83.jpghttp://pic.16xx8.com/allimg/110616/1220403945-84.jpgStep 46
Duplicatethe green circle shape. Place it behind the original shape. Resize it to 102%.
重复的绿色圆形。放置在原始形状的后面。调整其大小至102%。
http://pic.16xx8.com/allimg/110616/12204030L-85.jpg
Step 47
Draw aring shape with color #c9c2b1. Add following layer styles.
绘制一个颜色#c9c2b1环的形状。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/122040HG-86.jpghttp://pic.16xx8.com/allimg/110616/12204023P-87.jpghttp://pic.16xx8.com/allimg/110616/1220402Z9-88.jpghttp://pic.16xx8.com/allimg/110616/122040O00-89.jpgStep 48
Draw ablack circle and put it behind the ring shape. This will add depth onto thering and make it seems like a hole.
画一个黑圈，把后面的戒指形状。这将添加到环深度，它看起来像一个洞。
http://pic.16xx8.com/allimg/110616/1220402B7-90.jpgStep49
Createnew layer and place it behind all other button shapes. Draw a soft shadow.
创建新层，把后面的所有其他按钮的形状了。画一个软阴影。
http://pic.16xx8.com/allimg/110616/122040NG-91.jpgStep 50
Draw acircle shape. Add Layer Styles Outer Glow.
画一个圆的形状。添加图层样式外发光。
http://pic.16xx8.com/allimg/110616/1220405H2-92.jpgStep 51: Knob
Let’s continue with the second button. Draw another circle, this time use #383838 as its color. Add following Layer Styles.
让我们继续第二个按钮。绘制另一个圈子，这一次使用它的颜色#383838。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/1220404125-93.jpghttp://pic.16xx8.com/allimg/110616/1220402W8-94.jpghttp://pic.16xx8.com/allimg/110616/1220403339-95.jpgStep 52
Create new layer on top of the circle. Hit Command/Ctrl + Alt + G to convert it to Clipping Mask. Draw lots of 1 px black vertical lines.
对创建新层圈顶部。点击命令/按Ctrl + Alt+
G以将其转换为剪贴蒙版。画出1像素的黑色垂直线地段。
http://pic.16xx8.com/allimg/110616/12204055O-96.jpg
Step 53
Draw a darker circle on top of the previous circle. Add following Layer Styles.
绘制一份关于先前的循环圈最黑暗的。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/1220403M7-97.jpghttp://pic.16xx8.com/allimg/110616/122040BC-98.jpghttp://pic.16xx8.com/allimg/110616/1220405102-99.jpghttp://pic.16xx8.com/allimg/110616/1220401a8-100.jpgStep 54
Draw a ring shape behind the knob and add following layer styles.
画一个圈背后的旋钮的形状和添加图层样式如下。
http://pic.16xx8.com/allimg/110616/12204063X-101.jpghttp://pic.16xx8.com/allimg/110616/122040I25-102.jpghttp://pic.16xx8.com/allimg/110616/1220405262-103.jpgStep 55
Draw a black circle behind the ring shape.
后面画一个圈形黑圈。
http://pic.16xx8.com/allimg/110616/1220402602-104.jpgStep 56
Use soft brush to draw soft shadow under the button.
使用软刷会根据该按钮软阴影。
http://pic.16xx8.com/allimg/110616/1220404D7-105.jpg
Step 57
Draw a circle shape behind the ring. Add Outer Glow.
后面画一个圆形的环。添加外发光。
http://pic.16xx8.com/allimg/110616/12204061E-106.jpghttp://pic.16xx8.com/allimg/110616/1220404263-107.jpghttp://pic.16xx8.com/allimg/110616/122040NS-108.jpghttp://pic.16xx8.com/allimg/110616/12204061O-109.jpgStep 58: Flash
Draw a rounded rectangle. Add these layer styles.
画一个圆角矩形。新增这些图层样式。
http://pic.16xx8.com/allimg/110616/122040H54-110.jpghttp://pic.16xx8.com/allimg/110616/12204061X-111.jpghttp://pic.16xx8.com/allimg/110616/1220403324-112.jpghttp://pic.16xx8.com/allimg/110616/122040IC-113.jpghttp://pic.16xx8.com/allimg/110616/1220403E6-114.jpg
Step 59
Draw smaller rounded rectangle. Add following Layer Styles.
绘制小圆角矩形。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/1220405204-115.jpghttp://pic.16xx8.com/allimg/110616/1220403023-116.jpghttp://pic.16xx8.com/allimg/110616/1220402563-117.jpghttp://pic.16xx8.com/allimg/110616/1220401412-118.jpghttp://pic.16xx8.com/allimg/110616/1220403117-119.jpgStep 60
Duplicate shape we have just created. Remove all Layer Styles used. Set Fill layer to 0% then add Layer Style Bevel and Emboss.
重复的形状我们刚刚创建的。删除所有图层样式使用。填充层设置为0%，然后添加图层样式斜面和浮雕。
http://pic.16xx8.com/allimg/110616/122040I01-120.jpghttp://pic.16xx8.com/allimg/110616/1220406231-121.jpgStep 61
Draw a smaller rounded rectangle, color: #c6c6c6. Add Inner Glow and Bevel and Emboss.
绘制一个较小的圆角矩形，颜色：#c6c6c6。添加内发光和斜面和浮雕。
http://pic.16xx8.com/allimg/110616/122040Aa-122.jpghttp://pic.16xx8.com/allimg/110616/122040MJ-123.jpghttp://pic.16xx8.com/allimg/110616/1220403N8-124.jpgStep 62
Command/Ctrl-click rounded rectangle layer. Create new layer. Use soft brush to draw some highlights and shadows. See picture below for reference.
命令/按住Ctrl单击圆角矩形层。创建新的图层。使用软刷得出一些亮点和阴影。见下面的图片，以供参考。
http://pic.16xx8.com/allimg/110616/1220402434-125.jpghttp://pic.16xx8.com/allimg/110616/1220404C2-126.jpg
Step 63
Draw smaller rounded rectangle. Add Stroke. Change layer’s Opacity to 16% and Fill to 0%.
绘制小圆角矩形。新增行程。更改图层的不透明度为16%，填充为0%。
http://pic.16xx8.com/allimg/110616/1220402114-127.jpghttp://pic.16xx8.com/allimg/110616/1220404293-128.jpghttp://pic.16xx8.com/allimg/110616/1220404213-129.jpgStep 64
Use soft brush to draw more highlights on center of the flash.
使用软毛刷，以吸引更多的闪光灯的中心亮点。
http://pic.16xx8.com/allimg/110616/12204055O-130.jpgStep 65
Create new layer. Draw 1 px black lines. Reduce layer Opacity to 13%.
创建新的图层。画一像素的黑线。降低图层不透明度为13%。
http://pic.16xx8.com/allimg/110616/1220405I4-131.jpgStep 66
Draw more shadows on top bottom of the flash surface.
画出闪光表面顶底更多的阴影。
http://pic.16xx8.com/allimg/110616/122040C29-132.jpgStep 67
Create new layer and place it under the flash. Use soft brush to draw flash shadow.
创建新图层，置于闪存。使用软刷画闪光阴影。
http://pic.16xx8.com/allimg/110616/1220402P2-133.jpgStep 68: Rear Part
Draw a rounded rectangle. Place it behind all shapes.
画一个圆角矩形。它的形状放在背后。
http://pic.16xx8.com/allimg/110616/12204022J-134.jpgStep 69
Duplicate shape. Add smaller rounded rectangle and from the option bar set it to Intersect. See picture below for its placement. Add following Layer Styles.
重复的形状。新增小圆角矩形，并从选项栏中设置为相交。其位置见下面的图片。新增以下图层样式。
http://pic.16xx8.com/allimg/110616/1220404258-135.jpghttp://pic.16xx8.com/allimg/110616/122040L42-136.jpghttp://pic.16xx8.com/allimg/110616/1220403425-137.jpg
Step 70: AF Light
Draw a circle under the flash. Add Inner Shadow and Outer Glow.
闪光灯下画一个圈。添加内阴影，外发光。
http://pic.16xx8.com/allimg/110616/1220402464-138.jpghttp://pic.16xx8.com/allimg/110616/1220401c2-139.jpghttp://pic.16xx8.com/allimg/110616/1220404A9-140.jpghttp://pic.16xx8.com/allimg/110616/1220401925-141.jpgStep 71
Draw smaller circle shape inside previous shape with color #4d4b43. Add Inner Shadow.
较小的内画颜色#4d4b43与原来形状圆形。添加内阴影。
http://pic.16xx8.com/allimg/110616/122040LY-142.jpghttp://pic.16xx8.com/allimg/110616/1220401548-143.jpgStep 72: Camera Label
Draw a rounded rectangle on lower left of the camera. Add Inner Glow and Bevel and Emboss. Add camera name inside the rounded rectangle.
在较低的相机留下了一个圆角矩形。添加内发光和斜面和浮雕。相机内部添加圆角矩形的名称。
http://pic.16xx8.com/allimg/110616/1220402552-144.jpghttp://pic.16xx8.com/allimg/110616/1220403P7-145.jpghttp://pic.16xx8.com/allimg/110616/1220403F0-146.jpghttp://pic.16xx8.com/allimg/110616/1220406492-147.jpg
Step 73: Selector
Draw a rounded rectangle on the opposite side. Add Inner Glow and Bevel and Emboss.
上绘制一个圆角矩形对面。添加内发光和斜面和浮雕。
http://pic.16xx8.com/allimg/110616/122040M12-148.jpghttp://pic.16xx8.com/allimg/110616/12204025J-149.jpghttp://pic.16xx8.com/allimg/110616/122040C91-150.jpgStep 74
Draw a rectangle in the middle of the shape. Add Gradient Overlay and Drop Shadow.
画在中间长方形的形状。添加渐变叠加和阴影。
http://pic.16xx8.com/allimg/110616/1220404328-151.jpghttp://pic.16xx8.com/allimg/110616/1220403D6-152.jpghttp://pic.16xx8.com/allimg/110616/1220406256-153.jpgStep 75
Activate pen tool. Click lower side of the rectangle to add new point. Use Direct Selection Tool to pull it down.
激活钢笔工具。按较低的矩形的边添加新的点。使用直接选择工具把它拉下来。
http://pic.16xx8.com/allimg/110616/1220406105-154.jpg
Step 76
Draw a dark triangle shape.
绘制一个黑色三角形。
http://pic.16xx8.com/allimg/110616/1220401517-155.jpgStep 77
On top of the shape we have just created, draw a dark rounded rectangle. Add Layer Style Stroke.
论我们刚才创建的形状的顶部，绘制一个黑暗的圆角矩形。添加描边图层样式。
http://pic.16xx8.com/allimg/110616/12204063H-156.jpghttp://pic.16xx8.com/allimg/110616/1220404015-157.jpgStep 78
Draw circles and triangle for knob indicator.
绘制圆和三角形旋钮指标。
http://pic.16xx8.com/allimg/110616/1220404531-158.jpgStep 79: Colorful Ribbon
Our next step is drawing colorful ribbon across upper part of the camera body. Temporarily, hide flash. First, draw a tall red rectangle. Add Gradient Overlay to avoid flat color and Bevel and Emboss to give it three-dimensional appearance.
我们的下一步是在绘制多彩的机身上部剪彩。暂时隐藏闪光。首先，画一个高大的红色矩形。添加渐变叠加，以避免平面色彩和斜面和浮雕，给它的三维外观。
http://pic.16xx8.com/allimg/110616/122040O28-159.jpghttp://pic.16xx8.com/allimg/110616/1220405460-160.jpghttp://pic.16xx8.com/allimg/110616/1220406322-161.jpgStep 80
Duplicate rectangle by Alt-dragging it. Change their color.
重复按Alt矩形的拖动。改变自己的颜色。
http://pic.16xx8.com/allimg/110616/1220405U3-162.jpg
Step 81
Group all lines by selecting all line layers and hit Command/Ctrl + G. Command/Ctrl-click rounded rectangle shape that forms upper part of the camera. Click Add Layer Mask icon. Now, the ribbon is inside upper part of the camera.
组合所有线路全部由多层线路选择和命中命令/按Ctrl+克命令/
Ctrl键单击圆角矩形形状，形式，相机上部。点击添加图层蒙板图标。现在，色带是在相机内的上部。
http://pic.16xx8.com/allimg/110616/12204050A-163.jpgStep 82
Repeat previous steps to add another ribbon on middle part of the camera.
重复前面的步骤添加另一个摄像机的中间部分剪彩。
http://pic.16xx8.com/allimg/110616/122040H02-164.jpgStep 83
Duplicate shapes and put them on lower part of the camera.
重复的形状，放在降低了相机的一部分。
http://pic.16xx8.com/allimg/110616/12204041O-165.jpgStep 84
For these ribbons, change their Gradient Overlay mode from Screen to Multiply.
对于这些丝带，改变他们的梯度，屏幕叠加模式为叠加。
http://pic.16xx8.com/allimg/110616/1220405D6-166.jpgStep 85
Select the ribbon group. Hit Command/Ctrl + T to perform transformation. Right click and choose Perspective. Pull lower corner. See picture below for reference.
选择色带组。点击命令/按Ctrl + T进行改造。右击并选择视角。拉右下角。见下面的图片，以供参考。
http://pic.16xx8.com/allimg/110616/1220401152-167.jpg
Step 86
Select lower part of the ribbon. Invert selection by pressing Command/Ctrl + Shift + I then click Add Layer Mask icon.
选择较低的缎带的一部分。反转按命令/按Ctrl + Shift+I的选择，然后单击添加图层蒙板图标。
http://pic.16xx8.com/allimg/110616/12204050C-168.jpgStep 87
Duplicate colorful ribbon group, resize it, and place it under the previous ribbon. Paint soft white line on some part of the ribbon to give it three-dimentional appearance.
重复的彩带组，调整其大小，并将其放置在前面的缎带。漆软一些功能区的一部分的白线，以给它三维立体外观。
http://pic.16xx8.com/allimg/110616/122040J59-169.jpgStep 88
Create new layer above the ribbon. Paint black using soft brush with low Opacity to add depth onto the ribbon.
创建新层以上剪彩。涂料用低透明度黑色软刷上添加功能区的深度。
http://pic.16xx8.com/allimg/110616/1220402557-170.jpgStep 89: Photo
Create new group for the photo. See picture below for reference on its position. Draw rectangular selection in front of the camera. Click Add Layer Mask icon.
创建新组照片。见自己的立场参考下面的图片。绘制在镜头前矩形选区。点击添加图层蒙板图标。
http://pic.16xx8.com/allimg/110616/1220406414-171.jpgStep 90
Use pen tool to draw basic shape of a photo. Add Gradient Overlay to avoid flat color and Stroke to add photo border, which is the characteristic of a Polaroid photo.
使用钢笔工具绘制一张照片的基本形状。添加渐变叠加，以避免平面彩色和中风添加照片边框，这是一个宝丽来照片的特点。
http://pic.16xx8.com/allimg/110616/1220402546-172.jpghttp://pic.16xx8.com/allimg/110616/1220402208-173.jpghttp://pic.16xx8.com/allimg/110616/1220404154-174.jpghttp://pic.16xx8.com/allimg/110616/122040FU-175.jpgStep 91
Grab an image for the photo. I used a photo fromsxc.hu. Place the image right above the photo shape. Convert layer to Clipping Mask by pressing Command/Ctrl + Alt + G. The image will automatically goes inside the photo.
http://pic.16xx8.com/allimg/110616/12204030C-176.jpgStep 92
Command/Ctrl-click photo shape. Create new layer above the image. Draw shadow on the photo.
命令/
按住Ctrl单击照片的形状。创建新层以上的图像。照片上绘制阴影。
http://pic.16xx8.com/allimg/110616/122040H40-177.jpgStep 93
Create new layer and put it under the photo shape. Use soft brush tool to draw photo shadow on the floor.
创建新图层并把照片下形状。使用软刷工具画在地板上照片的阴影。
http://pic.16xx8.com/allimg/110616/122040GS-178.jpgStep 94: Camera Strap
Use pen tool to draw this shape. Put it behind the camera.
使用钢笔工具绘制这个形状。把后面的相机。
http://pic.16xx8.com/allimg/110616/122040ED-179.jpgStep 95
Next, draw a big rounded rectangle. Pull two points on lower side up. Add a rectangle path and set it to Subtract mode.
接下来，画一个大圆角矩形。下侧拉两个百分点。添加一个矩形路径并将其设置为减去模式。
http://pic.16xx8.com/allimg/110616/1220404b8-180.jpghttp://pic.16xx8.com/allimg/110616/122040KC-181.jpgStep 96: Shadows
Create new layer and place it under all layers. Draw a rectangular selection under the camera. Click Select > Modify > Feather, set radius to 35 pixels. Fill selection with black.
创建新图层，它置于所有图层。绘制一个矩形选择下的摄像头。点击选择“ > “修改 >
羽化，设置半径为35
像素。选择填充黑色。
http://pic.16xx8.com/allimg/110616/1220405S1-182.jpgStep 97
Use brush tool to draw darker shadow right under the camera.
使用画笔工具绘制较深的阴影下，相机的权利。
http://pic.16xx8.com/allimg/110616/1220403I0-183.jpgFinal Image
Finally, we have reached the end. Here’s the final polaroid camera icon we have just created. I hope you enjoy this tutorial and learn some new techniques.
最终图像
最后，我们走到了尽头。下面是最后宝丽来相机图标我们刚刚创建的。我希望你喜欢这个教程，学习一些新的技术。
http://pic.16xx8.com/allimg/110616/1220406448-184.jpg
作者:VincentG 出处:Iconfans
页:
[1]